pl130- 09 high speed translator buffer to lvds micrel inc. ? 2180 fortune drive ? san jose, ca 951 31 ? usa ? tel +1(408) 944 - 0800 ? fax +1(408) 474 - 1000 ? www.micrel.com rev 1/5/12 page 1 features ? differential lvds output ? single ac coupled input (min. 100mv swing). ? input range from 0 to 1.0ghz. ? 2.5v to 3.3v operation. ? available in 8-pin sop or 3x3mm qfn green/rohs compliant packaging. description the pl130-09 is a low cost, high perform an ce, high speed, buffer that reproduces any input fr e- quency from 0 to 1.0ghz. it provides a pair of differential lvds output. any input signal with at least 100mv swing can be used as reference signal. this chip is ideal for conversion from sine wave, ttl, cmos, or pecl to lvds. pin configuration (top view) block diagram input lvds_ bar ref_ in lvds pl130-09 12 3 4 5 6 7 8 gnd ref_ in gnd lvds vdd lvds_ bar vdd gnd lvds_ bar lvds gnd vdd 1 2 3 4 12 11 10 9 13 1415 16 87 6 5 vdd vdd gnd vdd gnd gnd gnd oe ^ gnd gnd ref_in gnd note : ^ denotes internal pull up pl 130 - 09 downloaded from: http:///
pl130- 09 high speed translator buffer to lvds micrel inc. ? 2180 fortune drive ? san jose, ca 95131 ? usa ? tel +1(408) 944 - 0800 ? fax +1(408) 474 - 1000 ? www.micrel.com rev 1/5/12 page 2 pin descriptions name pin number type description sop- 8l qfn- 16l gnd 1,3,7 1,2,4,5, 9,13,14,15 p ground. vdd 5,8 7,10,11,12 p power supply. ref_in 2 3 i reference input signal. the frequency of this signa l will be r e- produced at the output (after translation to lvds l evel). lvds 4 6 o lvds true output. lvds_bar 6 8 o lvds complementary output. oe n/a 16 i output enable (1 for enable). internal pull - up (default is 1). electrical specifications 1. absolute maximum ratings parameters symbol min. max. units supply voltage v dd 4.6 v input voltage, dc v i -0.5 v dd +0.5 v output voltage, dc v o -0.5 v dd +0.5 v storage temperature t s - 65 150 ? c ambient operating temperature* t a - 40 85 ? c junction temperature t j 125 ? c lead temperature (soldering, 10s) 260 ? c esd protection, human body model 2 kv exposure of the device under conditions beyond the limits specified by maximum ratings for extended pe riods may cause permane nt damage to the device and affect product reliability. these condi tions represent a stress rating only, and functiona l operations of the dev ice at these or any other co n- ditions above the operational limits noted in this specification is not implied. *operating temperature is guaranteed by design. pa rts are tested to commercial grade only. 2. general electrical specifications parameters symbol conditions min. typ. max. units supply current, no load i dd fout = 200mhz, lvds 25 30 ma operating voltage v dd 2.25 3.63 v output clock duty cycle @ 1.25v (lvds) 5% of input % short circuit current ? 50 ma downloaded from: http:///
pl130- 09 high speed translator buffer to lvds micrel inc. ? 2180 fortune drive ? san jose, ca 95131 ? usa ? tel +1(408) 944 - 0800 ? fax +1(408) 474 - 1000 ? www.micrel.com rev 1/5/12 page 3 3. ac specifications parameters conditions min. typ. max. units input frequency 0 1000 mhz input signal swing ref_in input 100 mv output frequency 0 1000 mhz 4. lvds electrical characteristics parameters symbol conditions min. typ. max. units output differential voltage v od r l = 100 ? (see figure) 247 355 454 mv v dd magnitude change ? v od - 50 50 mv output high voltage v oh 1.4 1.6 v output low voltage v ol 0.9 1.1 v offset voltage v os 1.125 1.2 1.375 v offset magnitude change ? v os 0 3 25 mv power-off leakage i oxd v ou t = v dd or gnd , v dd = 0v ? 1 ? 10 ua output short circuit current i osd -5.7 -8 ma 5. lvds switching characteristics parameters symbol conditions min. typ. max. units differential clock rise time t r r l = 100 ?? c l = 10 pf (see figure) 0.2 0.7 1.0 ns differential clock fall time t f 0.2 0.7 1.0 ns out out v od v os 50 ? 50 ? out v diff r l = 100 ? c l = 10pf c l = 10pf lvds switching test circuit lvds levels test circuit lvds transistion time waveform out out out 0 v (differential) 0v 20 % 80 % 20 % 80 % t r t f v diff downloaded from: http:///
pl130- 09 high speed translator buffer to lvds micrel inc. ? 2180 fortune drive ? san jose, ca 95131 ? usa ? tel +1(408) 944 - 0800 ? fax +1(408) 474 - 1000 ? www.micrel.com rev 1/5/12 page 4 package drawings (green package compliant) c l a 8 pin sop ( dimensions in mm ) sop-8l symbol min . max. a 1. 47 1. 73 a1 0. 10 0. 25 b 0. 33 0. 51 c 0. 19 0. 25 d 4. 80 4. 95 e 3. 80 4. 00 h 5. 80 6. 20 l 0. 38 1. 27 e 1. 27 bsc e h d a 1 e b qfn- 16 l downloaded from: http:///
pl130- 09 high speed translator buffer to lvds micrel inc. ? 2180 fortune drive ? san jose, ca 95131 ? usa ? tel +1(408) 944 - 0800 ? fax +1(408) 474 - 1000 ? www.micrel.com rev 1/5/12 page 5 ordering information (green package compliant) micrel inc., reserves the right to make changes in its products or specifications, or both at any time witho ut notice. the information furnished by micre l is believed to be accurate and reliable. however, micrel makes no guarantee or warranty concerning th e accuracy of said info rmation and shall not be responsible for any loss or damage of whatever natu re resul ting from the use of, or reliance upon this product. life support policy : micrels products are not authorized for use as c ritical components in life support devices or syste ms without the express written approval of the president of micrel inc. for part ordering, please contact our sales departm ent: 2180 fortune drive, san jose, ca 95131, usa tel: (408) 944 -0800 fax: (408) 474 -1 000 part number the order number for this device is a combination o f the following: device number, package type and operating temperatu re range pl 130- 09 x c part/order number marking package option pl130-09 qc -r p130 09 16 -pin qfn-16l - (tape and reel) pl130-09 sc p130-09 8-pin sop- 8l - (tube) pl130-09 sc -r p130-09 8-pin sop- 8l - (tape and reel) part number temperature c=commercial (0c to 70c) i=industral (-40c to 85c) downloaded from: http:///
|
